Service Updates

Loading Service Updates...
Last updated: 09/05/2019

Service and Maintenance Videos

Last updated: 09/05/2019

Tool Changer

Your tool changer is the hardest working component on your machine. See how to maintain it, and keep it running at optimal performance


Last updated: 09/05/2019


Keeping your tool running at the correct rpm and accuracy is vital for precision parts. Check out some of the latest tips on how to keep your spindle spinning correctly.


Last updated: 09/05/2019


Our service videos walk you through and explain some of the most common alarms you might encounter. Keep your machine running error free!


Last updated: 09/05/2019

Coolant Systems

Service Engineer Andrew shows you how to troubleshoot your Haas flood coolant pump. Before assuming it needs to be replaced or serviced watch this video.


Be Aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

“The more knowledgeable I am, the better I can do my job.”
– Shop Maintenance Supervisor –


Last updated: 09/05/2019

Have service questions or concerns?

If you feel you are not receiving proper support from your local Haas Factory Outlet, please let us know immediately, so we can address your concerns. Please provide us with your machine serial number in the questions or comments section. This will help us provide you with the fastest and most accurate information.