LAST CHANCE TO SAVE! DON’T MISS OUT!

SALE ENDS THIS MONTH!

OUR BIGGEST SALE OF THE YEAR ENDS 9/30/2019! (We really mean it!)

SAVE NOW

Spindles

Engineered and Manufactured in California – by Haas

Haas Spindles – Made on Haas Machines

We manufacture all spindles in-house using Haas machines. Mill and lathe spindles are roughed-out on Haas lathes in robotically tended cells. Final hard turning and threading are also completed on Haas machines.

See For Yourself

See how our lathe spindles are machined on Haas ST-40 turning centers in one of the longest-running robotic cells in the Haas factory.

Not Just Bearings and Shafts, but Electronics, Too

Spindles are only as good as the electronics that drive them. We meticulously engineer our drive systems to provide the absolute best performance and reliability possible for our machine tools. At Haas, vertical integration isn’t just a buzzword – it’s a way of life.

Powerful Vector Spindle Drives – The Haas-designed vector spindle drive uses closed-loop, digital servo technology to provide precise speed control and peak performance under heavy cutting loads, resulting in the fastest, most powerful spindles ever. Our vector drives allow you to push the spindle to 150 percent of the motor’s continuous power rating for 15 minutes, and to 200 percent for 3 minutes. That’s more performance headroom than most other drives on the market.

On-The-Fly Wye-Delta Switching – Many Haas machines feature a dual-winding motor – wye and delta – with an electronic switch to change between the two windings. By selecting the best winding for low-rpm cutting and the best winding for high-rpm cutting, we provide higher torque over a wider rpm range. And our on-the-fly wye/delta switching maximizes acceleration/deceleration rates for more chip making and less waiting.

Synchronized Tapping – The Haas high-performance spindle is synchronized with the machine’s Z-axis motion to provide synchronized tapping. This eliminates the need for expensive floating tap holders, and prevents lead-thread distortion and start-thread pullout. The tap can retract up to nine times faster than it went in to reduce cycle times, and an automated tap recovery feature can easily back the tap out of a hole in the event of an interruption. (Standard on all machines except GR, Mini Mill, Toolroom Mill, and Toolroom Lathe.)    

Spindle Construction

The advanced design of our spindles provides high axial-thrust capability, yet generates minimal heat. The front and rear bores of the housing and the OD of the spindle are finished in one operation. This guarantees perfect alignment between the bores and ODs, thus reducing bearing heat. We use only top-quality, high-precision bearings throughout our spindles, with the two forward bearings separated by a large spacer to enhance radial stability – enabling heavy cuts in hard materials. To ensure long life, each spindle is pressurized to prevent coolant contamination, and lubricated automatically to ensure precise lubrication and long bearing life.

Belt Drive

This system features a Haas-built cartridge spindle that is driven by the motor via belt. This provides a good combination of torque and rpm for a wide selection of machining operations. It is a great overall value.

Inline Drive

The standard configuration for most Haas 40-taper VMCs is an inline direct-drive spindle that is coupled directly to the motor to provide excellent surface finishes and greater thermal stability. The inline spindle is available in 8100-rpm to 20,000-rpm.

Gear Drive

The Haas geared-head spindle provides increased low-end torque for heavy cutting, while retaining the ability to run up to 10,000 rpm for high-speed machining. It is standard on 50-taper machines, and optional on most 40-taper machines.

4000-rpm Spindle

  • 4k Speed
  • 40 Taper
  • 7.5 hp Power
  • Belt Drive

Standard spindle for Toolroom Mills

   

6000-rpm Spindle

  • 6k Speed
  • 40 Taper
  • 7.5 hp Power
  • Belt Drive

Standard spindle for P-model Toolroom Mills

   

7500-rpm Spindle

  • 7.5k Speed
  • 50 Taper
  • 30 hp Power
  • Gearbox Drive

Standard spindle for 50-taper VF and EC Series

   

High-Performance 7500-rpm Spindle

  • 7.5k Speed
  • 50 Taper
  • 60 hp Power
  • Gearbox Drive

High-power spindle for 50-taper VF and EC Series

   

8100-rpm Spindle

  • 8.1k Speed
  • 40 Taper
  • 15 hp Power
  • Belt Drive

Standard spindle for Gantry Series

   

8100-rpm Spindle

  • 8.1k Speed
  • 40 Taper
  • 30 hp Power
  • Inline Drive

Standard spindle for 40-taper VF and EC Series

   

8100-rpm Spindle GB

  • 8.1k Speed
  • 40 Taper
  • 20 hp Power
  • Gearbox Drive

Gear-driven spindle for VF Series

   

10,000-rpm Spindle

  • 10k Speed
  • 30 Taper
  • 15 hp Power
  • Inline Drive

Standard spindle for Drill/Tap Series

   

10,000-rpm Spindle

  • 10k Speed
  • 40 Taper
  • 15 hp Power
  • Belt Drive

Standard spindle for Super Mini Mills

   

10,000-rpm Grease-Packed Spindle

  • 10k Speed
  • 40 Taper
  • Belt Drive

Optional spindle for MM, TM, and GR Series

   

10,000-rpm Inline Grease-Packed Spindle

  • 10k Speed
  • 40 Taper
  • Inline Drive

Optional spindle for 40-taper VF Series

   

10,000-rpm Spindle

  • 10k Speed
  • 40 Taper
  • 15 hp Power
  • Inline Drive

Standard spindle for Drill/Mill Series

   

10,000-rpm Spindle

  • 10k Speed
  • 40 Taper
  • 30 hp Power
  • Inline Drive

High-speed spindle for 40-taper VF and EC Series

   

10,000-rpm Spindle GB

  • 10k Speed
  • 40 Taper
  • 20 hp Power
  • Gearbox Drive

High-speed gear-driven spindle for VF Series

   

High-Performance 10,000-rpm Spindle

  • 10k Speed
  • 50 Taper
  • 60 hp Power
  • Gearbox Drive

High-power, high-speed spindle for 50-taper VF and EC Series

   

12,000-rpm Spindle

  • 12k Speed
  • 30 Taper
  • 15 hp Power
  • Inline Drive

High-performance spindle for Drill/Tap Series

   

12,000-rpm Spindle

  • 12k Speed
  • 40 Taper
  • 15 hp Power
  • Inline Drive

High-performance spindle for Drill/Mill Series

   

12,000-rpm Spindle

  • 12k Speed
  • 40 Taper
  • 30 hp Power
  • Inline Drive

High-speed spindle for 40-taper vertical and horizontal mills

   

12,000-rpm Spindle, HSK-A 63

  • 12k Speed
  • HSK-A 63 Taper
  • 30 hp Power
  • Inline Drive

HSK spindle for VM series

   

15,000-rpm Spindle

  • 15k Speed
  • 30 Taper
  • 15 hp Power
  • Inline Drive

High-performance spindle for Drill/Tap Series

   

15,000-rpm Spindle

  • 15k Speed
  • 40 Taper
  • 15 hp Power
  • Belt Drive

High-speed spindle for Super Mini Mills

   

15,000-rpm Spindle

  • 15k Speed
  • 40 Taper
  • 15 hp Power
  • Inline Drive

High-performance spindle for Drill/Mill Series

   

15,000-rpm Spindle

  • 15k Speed
  • 40 Taper
  • 30 hp Power
  • Inline Drive

High-speed spindle for 40-taper vertical and horizontal mills

   

15,000-rpm Spindle, HSK-A 63

  • 15k Speed
  • HSK-A 63 Taper
  • 30 hp Power
  • Inline Drive

HSK spindle for UMCs and VM Series

   

20,000-rpm Spindle, HSK-63F

  • 20k Speed
  • HSK-63F Taper
  • 13 hp Power
  • Integral Motor Drive

Standard HSK spindle for the GM-2-5AX

   

20,000-rpm Spindle

  • 20k Speed
  • 30 Taper
  • 15 hp Power
  • Inline Drive

High-speed spindle for Drill/Tap Series

   

30,000-rpm Spindle

  • 30k Speed
  • 30 Taper
  • 20 hp Power
  • Belt Drive

High-speed 30-taper spindle for VF Series and Mold Machines

   

30,000-rpm Spindle

  • 30k Speed
  • 20 Taper
  • 5 hp Power
  • Belt Drive

Standard Spindle for Compact Mills

   

50,000-rpm Spindle

  • 50k Speed
  • 20 Taper
  • 5 hp Power
  • Belt Drive

High-speed spindle for Compact Mills

   

Spindle Construction

The advanced design of our spindles provides high axial-thrust capability, yet generates minimal heat. The front and rear bores of the housing and the OD of the spindle are finished in one operation. This guarantees perfect alignment between the bores and ODs, thus reducing bearing heat. We use only top-quality, high-precision bearings throughout our spindles, with the two forward bearings separated by a large spacer to enhance radial stability – enabling heavy cuts in hard materials. To ensure long life, each spindle is pressurized to prevent coolant contamination, and lubricated automatically to ensure precise lubrication and long bearing life.

7500-rpm Spindle

  • 7.5k Speed
  • 50 Taper
  • 30 hp Power
  • Gearbox Drive

Standard spindle for 50-taper VF and EC Series

   

High-Performance 7500-rpm Spindle

  • 7.5k Speed
  • 50 Taper
  • 60 hp Power
  • Gearbox Drive

High-power spindle for 50-taper VF and EC Series

   

8100-rpm Spindle

  • 8.1k Speed
  • 40 Taper
  • 30 hp Power
  • Inline Drive

Standard spindle for 40-taper VF and EC Series

   

10,000-rpm Spindle

  • 10k Speed
  • 40 Taper
  • 30 hp Power
  • Inline Drive

High-speed spindle for 40-taper VF and EC Series

   

High-Performance 10,000-rpm Spindle

  • 10k Speed
  • 50 Taper
  • 60 hp Power
  • Gearbox Drive

High-power, high-speed spindle for 50-taper VF and EC Series

   

12,000-rpm Spindle

  • 12k Speed
  • 40 Taper
  • 30 hp Power
  • Inline Drive

High-speed spindle for 40-taper vertical and horizontal mills

   

15,000-rpm Spindle

  • 15k Speed
  • 40 Taper
  • 30 hp Power
  • Inline Drive

High-speed spindle for 40-taper vertical and horizontal mills

   

15,000-rpm Spindle, HSK-A 63

  • 15k Speed
  • HSK-A 63 Taper
  • 30 hp Power
  • Inline Drive

HSK spindle for UMCs and VM Series

   

Spindle Construction

The advanced design of our spindles provides high axial-thrust capability, yet generates minimal heat. The front and rear bores of the housing and the OD of the spindle are finished in one operation. This guarantees perfect alignment between the bores and ODs, thus reducing bearing heat. We use only top-quality, high-precision bearings throughout our spindles, with the two forward bearings separated by a large spacer to enhance radial stability – enabling heavy cuts in hard materials. To ensure long life, each spindle is pressurized to prevent coolant contamination, and lubricated automatically to ensure precise lubrication and long bearing life.

Extra-Performance Option

  • 55 hp POWER
  • Gearbox DRIVE

High-power spindle for the ST-40/L and ST-45/L

   

1000-rpm Spindle

  • 1k speed
  • A1-20 nose
  • 55 hp power
  • Gearbox drive

Standard spindle for the ST-55

   

1200-rpm Spindle

  • 1.2k speed
  • A2-15 nose
  • 55 hp power
  • Gearbox drive

Standard spindle for the ST-50

   

1400-rpm Spindle

  • 1.4k speed
  • A2-11 Nose
  • 40 hp Power
  • Gearbox drive

Standard spindle for the ST-45/L

   

1800-rpm Spindle, A2-5

  • 1.8k speed
  • A2-5 nose
  • 10 hp power
  • Belt drive

Standard spindle for the Toolroom Lathe Series

   

1800-rpm Spindle, A2-6

  • 1.8k speed
  • A2-6 nose
  • 10 hp power
  • Belt drive

Optional spindle for the Toolroom Lathe Series

   

2400-rpm Spindle

  • 2.4k SPEED
  • A2-8 NOSE
  • 40 hp POWER
  • Gearbox DRIVE

Standard spindle for the ST-40/L

   

2400-rpm Spindle

  • 2.4k speed
  • A2-8 nose
  • 40 hp power
  • Gearbox drive

Gear-driven spindle for the ST-35/Y

   

4500-rpm Main Spindle, 3" Bore, 10" Chuck

  • 4.5k speed
  • A2-6 nose
  • 30 hp power
  • Belt drive

Big-bore spindle for the DS-30Y

   

3000-rpm Spindle, A2-5

  • 3k speed
  • A2-5 nose
  • 10 hp power
  • Belt drive

Optional spindle for the Toolroom Lathe Series

   

3000-rpm Spindle, A2-6

  • 3k speed
  • A2-6 nose
  • 10 hp power
  • Belt drive

Optional spindle for the Toolroom Lathe Series

   

3200-rpm Spindle

  • 3.2k speed
  • A2-8 nose
  • 40 hp power
  • Belt drive

Standard spindle for the ST-35/Y

   

3400-rpm Spindle – Belt Drive

  • 3.4k speed
  • A2-6 nose
  • 30 hp power
  • Belt drive

Standard spindle for the ST-25/Y and ST-30/Y

   

3400-rpm Spindle – Gear Drive

  • 3.4k speed
  • A2-6 nose
  • 30 hp power
  • Gearbox drive

Gear-driven spindle for the ST-30/Y

   

4000-rpm Spindle

  • 4k speed
  • A2-6 nose
  • 20 hp power
  • Belt drive

Standard spindle for the ST-15/Y, ST-20/Y

   

4500-rpm Spindle

  • 4.5k speed
  • A2-6 Nose
  • 30 hp power
  • Belt drive

High-speed spindle for the ST-30/Y

   

4800-rpm Secondary Spindle

  • 4.8k speed
  • A2-5 nose
  • 20 hp power
  • Belt drive

Standard secondary-spindle for the DS-30Y

   

5000-rpm Spindle

  • 5k speed
  • A2-6 nose
  • 30 hp power
  • Belt drive

High-speed spindle for the ST-20/Y

   

6000-rpm Spindle

  • 6k speed
  • A2-5 nose
  • 15 hp power
  • Belt drive

Standard spindle for the ST-10/Y

   

6000-rpm Spindle

  • 6k speed
  • 5C nose
  • 5 hp power
  • Belt drive

Standard spindle for the Compact Lathe

   

A2-5 Finishing Sub-Spindle

  • A2-5 Spindle Nose
  • 5.3" Chuck Size
  • 6000 rpm Speed

Available for ST-10 through ST-25 models

   

What machine will you design today?

Build & Price

Your new Haas machine tool is waiting.

Shop Now

Cookie Notice

Enable Analytics Cookies

We use cookies to improve your user experience. Our Cookie Notice describes which cookies we use, why we use them, and how you can find more information about them. Please confirm you consent to us using analytics cookies. If you do not consent, you may still use our website with a reduced user experience.