Rotaries & Indexers
- My Haas
USD prices DO NOT include customs duty, customs fees, insurance, VAT, or freight.
CNY prices include customs duty, customs fees, insurance, and VAT. DOES NOT include freight.
The Haas Automatic Parts Loader is a simple and affordable way to automate part production and boost productivity on Haas turning centers. It is designed and built exclusively for use on Haas turning centers, and connects directly to the Haas control.
Note: The APL is compatible with the sub-spindle option; however, the APL can only load/unload parts from the lathe main spindle.
Our redesigned APL is a simple way to automate part production on Haas ST-10 through ST-25 turning centers, including Y-axis models. It integrates seamlessly with the Haas control, and features a simple setup interface that will have you fully automated in minutes, loading and unloading parts for unattended machining.
The Automatic Parts Loader (APL) is a simple way to automate part production on Haas ST-10 through ST-25 turning centers, including Y-axis models. The easy-to-use interface in the Haas control guides you through a simple, step-by-step setup process that “teaches” the APL arm its positions, and has you fully automated in minutes, loading and unloading parts for unattended machining.
|Axis Travels (AU, AV, AW)||111" x 28" x 46"||2819 x 711 x 1168 mm|
|Maximun Part (Diameter x Length)
||5.8" x 5.0"
||147 x 127 mm
|Maximum Part Weight Per Gripper||10 lb
|Table Size (Length x Width)||48" x 28"||1219 x 711 mm|
|Table Load Capacity||1000 lb||454 kg|
Part management on the APL table is done using one of three included templates, which handle parts from 1.0" (25 mm) to 5.8" (147 mm) in diameter. Various part shapes – such as round, hex, and square – can be loaded, and grippers can be adjusted or modified to best fit your parts.
The APL is programmed directly through the lathe’s control, and set up using the Haas APL interface, which guides the operator through the steps necessary to quickly program the APL. Answering simple questions, the operator enters basic information by either positioning the part grippers and pushing a single button, or by entering basic numeric dimensions. All values are calculated automatically by the control, and the APL is ready to go.
The APL operates in the background during normal lathe operations, returning parts to the storage table and retrieving new raw pieces while parts are being machined. The result is near-continuous, unattended machining. The double-sided rotating gripper saves time by taking a part from the spindle and replacing it with a different piece without having to return to the storage table.
Easy-to-Use APL Interface
Our easy-to-use APL interface uses simple, step-by-step instructions to help the operator “teach” the APL the correct positions for picking up, loading, and unloading parts.
Simple to Operate in APL Mode
APL Mode seamlessly combines the part program selected in Memory [MEM] with a designated APL setup template to automate part production and boost productivity.
A new M-code was developed for use with Auto Part Loaders. M299 is typically used at the end of a part program. When the program is started by pressing [CYCLE START] in Memory mode, the M299 acts exactly like an M30 (Program End and Reset). But if the program is started while “APL Mode” is active, then the M299 will command the APL to load the first part from table, and then run the active program in Memory.
|AU Axis||111 in||2819 mm|
|AV Axis||28 in||711 mm|
|AW Axis||46 in||1168 mm|
|Rapids (AU||1417 ipm||36 m/min|
|Rapids (AV)||118 ipm||3 m/min|
|Rapids (AW)||1417 ipm||36 m/min|
|Max Part Diameter||5.8 in||147 mm|
|Max Part Length||5.0 in||127 mm|
|Max Part Weight (per gripper)||10 lb||4.5 kg|
|Gripper Rotation||90 °||90 °|
|Length||48.0 in||1219 mm|
|Width||28.0 in||711 mm|
|Load Capacity||1000 lb||454 kg|
|Dimensions - Shipping||S.A.E||METRIC|
|Domestic Pallet||158 in x 72 in x 124 in||401 cm x 183 cm x 315 cm|
|Export Pallet||158 in x 72 in x 124 in||401 cm x 183 cm x 315 cm|
|Weight||2300 lb||1043.0 kg|
If you would like more information about how a new Haas machine can bring your products to life, please share your contact information.
CNC Lathe with 14" x 16" max capacity and 1.75" bar capacity
Y-Axis CNC Lathe with 12" x 16" max capacity and 1.75" bar capacity
Y-Axis CNC Lathe with 12" x 16" max capacity and 2.5" bar capacity
CNC Lathe with 15" x 22.5" max capacity and 2.5" bar capacity
All prices and specifications subject to change without notice. Freight, rigging, state & local taxes, vendor installation charges, and dealer installed accessories are not included. Not responsible for misprints or typographical errors. Machines shown with optional equipment. Actual product appearance may differ.